标题: 板子配置问题 [打印本页] 作者: wuhan 时间: 2017-3-23 15:53 标题: 板子配置问题 请教一下，我在虚拟仿真工程的时候原先使用的平台是D:\ti\ccsv5\ccs_base下的ti.platforms.evm6657，现在想要在创龙的板子上debug硬件仿真，是不是应该修改平台，应该怎么改呢？
我按照《3-1-TMS320C665x开发例程使用手册》新建 SSYS/BIOS平台的参数设置新建了一个平台，但是编译出现了下面4个错误，请问这是为什么呢？我该怎么改呢？
Description Resource Path Location Type
<a href="file:/D:/ti/ccsv5/tools/compiler/dmed/HTML/10099.html">#10099-D</a> ./configPkg/linker.cmd program will not fit into available memory. run placement with alignment fails for section ".stack" size 0x200 . Available memory ranges: FFT2DTEST0315 line 171 C/C++ Problem
Description Resource Path Location Type
<a href="file:/D:/ti/ccsv5/tools/compiler/dmed/HTML/10099.html">#10099-D</a> ./configPkg/linker.cmd program will not fit into available memory. run placement with alignment fails for section ".ll2_mem" size 0x190a8 . Available memory ranges: FFT2DTEST0315 line 198 C/C++ Problem
Description Resource Path Location Type
<a href="file:/D:/ti/ccsv5/tools/compiler/dmed/HTML/10099.html">#10099-D</a> ./configPkg/linker.cmd program will not fit into available memory. run placement with alignment fails for section ".far" size 0x5433 . Available memory ranges: FFT2DTEST0315 line 186 C/C++ Problem
Description Resource Path Location Type
<a href="file:/D:/ti/ccsv5/tools/compiler/dmed/HTML/10099.html">#10099-D</a> ./configPkg/linker.cmd program will not fit into available memory. run placement with alignment fails for section ".cio" size 0x127 . Available memory ranges: FFT2DTEST0315 line 188 C/C++ Problem
作者: human 时间: 2017-3-24 09:51
请参考开发例程使用手册
——新建 SYS/BIOS工程步骤作者: human 时间: 2017-3-24 09:52
[attach]2096[/attach]