CCS6.0怎么烧录程序到C55x的外部SPI Flash？

lushidegreen

在http://processors.wiki.ti.com/index.php/C5515_Boot-Image_Programmer#Software_Tools_Checklist只有简单的描述，

Howto program a boot image onto C5515 EVM

Once a boot image (*.bin) is generated, customers can burn theboot image into the NOR Flash, NAND Flash, 16-bit SPI EEPROM, I2C EEPROM, andMMC/SD card, on the C5515 EVM through a utility called programmer that runs onC5515 using an emulator with CodeComposer Studio™ software.

而且不适用于CCS6.0。

请问编译成功后，得到.out文件，如何将其烧录到外部SPI FLASH上，还需要什么步骤和软件工具？