OMAPL138使用XDS200的问题

zycdlv0903

开发板拨码为01111 DEBUG模式,XDS200驱动正常
目标配置时尝试过使用TI XDS2XX USB和USB ON BOARD两个版本，连接测试均正常，给ARM装载GEL连接后提示

# O7 k6 U/ @& N6 I. aError connecting to the target:
# r) W" o' O0 V  \: f; O(Error -2062 @ 0x32D0)
9 _- x. }& r1 `Unable to halt device. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK).
(Emulation package 5.1.232.0)

& c# c, k9 ]) y. y! V$ q6 ^查看常见问题手册重启CCS后问题依旧
1 D- }. _/ A9 `4 o2 L- \3 |

human

建议把拨码开关调到debug模式