OMAPL138使用XDS200的问题

zycdlv0903

开发板拨码为01111 DEBUG模式,XDS200驱动正常
目标配置时尝试过使用TI XDS2XX USB和USB ON BOARD两个版本，连接测试均正常，给ARM装载GEL连接后提示

' [- i/ j% [0 K2 i, {7 u# t+ pError connecting to the target:
  [9 h( x% G- f" Q(Error -2062 @ 0x32D0)
' A2 z  O3 [$ Z: ~2 EUnable to halt device. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK).
(Emulation package 5.1.232.0)

, h5 M3 ?/ y& o$ v- k查看常见问题手册重启CCS后问题依旧

human

建议把拨码开关调到debug模式