OMAPL138使用XDS200的问题

zycdlv0903

开发板拨码为01111 DEBUG模式,XDS200驱动正常
目标配置时尝试过使用TI XDS2XX USB和USB ON BOARD两个版本，连接测试均正常，给ARM装载GEL连接后提示
" U9 ^8 F! H. m, N! _
Error connecting to the target:
$ t; u4 P  ]' V" X- p7 Y. a(Error -2062 @ 0x32D0)
Unable to halt device. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK).
. o: n, r* _, U+ A% r% [0 G(Emulation package 5.1.232.0)
1 e' H% ^* P7 z& U/ l) o6 F
8 Z# L$ [7 z' ?; f5 e6 P/ }查看常见问题手册重启CCS后问题依旧

human

建议把拨码开关调到debug模式