OMAPL138使用XDS200的问题

zycdlv0903

开发板拨码为01111 DEBUG模式,XDS200驱动正常
* p& I3 w" \5 v. Z目标配置时尝试过使用TI XDS2XX USB和USB ON BOARD两个版本，连接测试均正常，给ARM装载GEL连接后提示
) O( X4 W' T, g# q. z
& \5 T  G. X2 S! M* z+ j! \Error connecting to the target:
9 Z( @$ c, C( z& d  X5 k- U8 W" @(Error -2062 @ 0x32D0)
0 Q! J. k: m3 {! c6 ?! e6 jUnable to halt device. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK).
+ X/ v. r; P5 N  S9 s7 f(Emulation package 5.1.232.0)

  c+ x& d. g; O- E, x; w3 E查看常见问题手册重启CCS后问题依旧

human

建议把拨码开关调到debug模式