|
大家好,我的开发板在连接硬盘后,linux启动的打印信息就会一直打印如下信息,应该是提示硬盘没有启动成功,7 s) ]: i$ j- Y& T3 o" V: F {, Z9 m
请问,各位有遇到过这种情况吗? 先谢谢各位了
6 m( p+ L) q$ p8 J* t5 c [ 3.968375] ata1: SATA link down (SStatus 1 SControl 300)
5 @! R# w, Z* Q1 D( a& H[ 3.978046] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
7 ~5 {7 ?+ }2 u4 O[ 3.985689] ata1: irq_stat 0x00000040, connection status changed
) r2 L/ e7 ]* G, Y: l[ 3.991897] ata1: SError: { DevExch }
6 ~1 v* Z4 c: l: u[ 3.995693] ata1: hard resetting link
1 |# Y- U$ ^4 u$ |6 [2 {[ 5.328604] PHY: davinci_mdio-0:01 - Link is Up - 100/Full
# x$ ]( B) e2 I. U7 B& _; p[ 5.360287] IP-Config: Complete:
* j3 |) e+ u% L0 W- u! H[ 5.363572] device=eth0, addr=10.10.33.8, mask=255.255.0.0, gw=10.10.28.1,
4 M2 z. ~5 G2 |- n[ 5.370878] host=10.10.33.8, domain=, nis-domain=(none),
$ \* B8 D0 M. d y5 `[ 5.376699] bootserver=10.10.33.6, rootserver=10.10.33.6, rootpath=2 v' a/ T2 b0 Z o
[ 6.348378] ata1: COMRESET failed (errno=-32)
2 p6 G4 |( V, |4 l& z[ 6.352801] ata1: reset failed (errno=-32), retrying in 8 secs/ f3 s: W t7 Y$ W. G. f
[ 13.998372] ata1: limiting SATA link speed to 1.5 Gbps
( d0 }2 ?+ y+ S# o: X[ 14.003577] ata1: hard resetting link R( m6 `, j- ~9 u
5 K' O1 \& `8 g" k |
|