OMAPL138使用XDS200的问题

zycdlv0903

开发板拨码为01111 DEBUG模式,XDS200驱动正常
6 v3 E: u2 O1 s/ V3 p! y+ O% Y& }目标配置时尝试过使用TI XDS2XX USB和USB ON BOARD两个版本，连接测试均正常，给ARM装载GEL连接后提示
1 k5 ?3 o$ ]1 c4 \
Error connecting to the target:
(Error -2062 @ 0x32D0)
2 h9 @9 d9 [2 z8 ]* |* L& NUnable to halt device. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK).
: }3 o  t( a  ~% y% H/ o+ u6 ](Emulation package 5.1.232.0)

查看常见问题手册重启CCS后问题依旧
% ]% e: H. G# D! A

human

建议把拨码开关调到debug模式